Agriculture

Of course you can! With the right heating and insulation, you can keep your fabric structure warm and comfortable all winter. We insulate our structures in a way that ensures good insulation value. Then, your fabric structure can be equipped with one of several heating solutions, such as an air source heat pump.

Whether or not a construction permit is required depends on your project. The best way to find out is to contact your municipality or local council and ask them directly. Or, if you prefer, we’re happy to take care of the entire application process. We’re always ready to help with blueprints and any other documentation you need when requesting a construction permit. Contact us for more information!

The foundation should preferably be flat, stable and able to support the weight of the storage structure. It’s also recommended that the foundation has a moisture barrier to prevent water seeping up from the ground and damaging the structure. We generally assemble storage warehouses on a well-packed gravel foundation. However, we can install them on all types of surfaces. Concrete, asphalt, gravel and paving stones are all viable options!

Because their steel frames are made of high-strength steel, fabric structures have a lifespan of several decades. The technical lifespan of the technical textile is about 25 to 30 years, but you can easily change it out if you need to, without affecting the frame. All steel frames in our fabric structures are hot-dip galvanized and therefore completely rust-protected in accordance with EN 1461.

A fabric structure requires very little maintenance. However, it should be inspected at regular intervals for loose or damaged seams, tears or slits in the fabric and any signs of moisture infiltration. If you’re interested, we offer service and maintenance contracts upon agreement. We’ll then service the hall ourselves so you can feel confident that all the maintenance is taken care of and that all inspection requirements are followed in a safe and economical way.

A fabric structure can take a lot of wind, but it’s important to make sure the structure is properly attached to the ground. Our constructions are developed according to the EN Eurocodes, which require calculations of snow and wind loads for the precise location in which each structure is to be assembled.

Yes, they are. We are, of course, certified in accordance with EN 1090, which governs load-bearing components of structures. Companies that manufacture load-bearing components using the EN Eurocodes must get certified in accordance with EN 1090. As a certified manufacturer, we issue a declaration of performance and CE marks, both of which certify that our products meet these standards.

Break-ins in fabric structures are generally very rare. They’re not completely burglary-proof, but they can be made more secure by using padlocks on the zippers. If, for whatever reason, you require greater anti-theft protection, we recommend adding extra fittings such as metal-clad sides. We can help you design your structure according to your needs. Contact us for more information!

An industrial structure usually has a steel frame and a sheet metal exterior, although we also offer constructions that are lined with technical textile or sandwich cladding. We offer the production and manufacturing industry highly practical industrial structures with size, materials and interior fittings, all of which are fully customizable. Contact us for a free quotation!

Some factors that affect the cost of an industrial structure are size, fittings, required snow load capacity and customer customizations. In order to give you a quotation, we need more information about your specific needs and desires. In general, it’s more economical to build a long, thin structure than a short, wide one. Our products are developed in order to be competitively priced and we offer fast delivery. We’re happy to provide a free quotation.

The price depends on both the size of the structure and any specific requirements you have. Required snow load capacity and other customizations are also factors. In general, it’s more economical to build long, thin structures than short, wide ones. Our products are developed in order to be competitively priced and we offer fast delivery. We’re happy to provide a free quotation.

Whether or not a construction permit is required depends on your project. The best way to find out is to contact your municipality or local council and ask them directly. Or, if you prefer, we’re happy to take care of the entire application process. We’re always ready to help with blueprints and any other documentation you need when requesting a construction permit. Contact us for more information!

Our industrial structures are certified according to the EN 1090 standard, which refers to load-bearing components. That means that the quality of the products we manufacture has been checked independently by a third party.

The EN 1090 standard covers all aspects of production from material selection to final inspection. As a certified manufacturer, we issue declarations of performance and CE marks.

The cost of an industrial building can vary depending on size, fittings, snow load dimensioning and customer customizations. In order to give you a quotation, we need more information about your specific needs and desires. Our products are developed with two main objectives in mind: competitive pricing and fast delivery. We’re happy to provide a free quote and you’re welcome to contact us with any questions.

Steel structures are very cost-effective and economical. The price depends on both the size of the structure and any specific requirements you have. Required snow load capacity and other customizations are also factors. We guarantee competitive prices, fast delivery and durable, long-lasting constructions that can be used for almost any purpose. We’re happy to provide a free quote and you’re welcome to contact us with any questions.

There are lots of factors that go into calculating the cost of building a sheet metal structure, including the project’s size and complexity, fittings, required snow load capacity and any customizations you require. In order to give you a quotation, we need more information about your specific needs and desires. In general, it’s more economical to build long, thin structures than short, wide ones because the steel frames with a smaller span are cheaper than those with a larger span. We’re happy to provide a free quote and you’re welcome to contact us with any questions.